When the injection molding machine is improperly operated or used improperly, many failure problems will occur. When you understand the maintenance of the injection molding machine, you should have a detailed understanding of the failure, and you can also look at the specific solutions. Confirming these basic conditions will also make it easier to select equipment.
Oil pump motor failure
There may also be many failures in the oil pump motor during use. Generally, the equipment should be shut down in an emergency when there is an abnormal sound, and check whether the fuse is blown or loose. After checking, look at other reasons. Generally, no The abnormal sound may also be a loose wire.
Motor failure
When the motor is in use, it may not be able to run. It is necessary to check whether it is a pressure problem or a large pump problem and find the problem in time to solve it quickly. The maintenance of the injection molding machine itself needs to consider many factors, and sometimes it may need to be disassembled to find the cause, which can better solve the failure problem.
en
es
cn
