Maintenance work of automatic cartoning machine

1. Clean the cartoning machine, not only lubricate the rolling bearing and other transmission systems, try to maintain it on time, add mechanical red oil when needed to keep the chain running

2. The cartoning machine prevents rusting, retesting treatment, waterproofing and other maintenance work. In order to ensure the normal operation of each part of the automatic cartoning machine, the installation operation is used. The recommended operator of the Rongyu automatic cartoning machine manufacturer Grasp the maintenance methods of machinery and equipment during operation, and reduce the repair rate of such machinery and equipment by reasonable maintenance.It can automatically complete the carton forming, opening, product packing and sealing, etc. automatically. At the same time, the hot melt glue machine can be matched according to the demand.

 3.The machine adopts PLC control. The photoelectricity monitors the actions of various parts, and if there is an abnormality during operation, it can automatically stop and display the reason for timely troubleshooting.The main drive motor and clutch brake are installed inside the frame, and each part of the transmission system torque overload protector is installed on the machine board. Under overload conditions, the main drive motor can be separated from each transmission part to ensure completeness. Machine security.

4. The machine is equipped with an intelligent detection device. There is no paper box automatically when there is no material, which is convenient to work with the front equipment.

5. This machine can be used alone or in conjunction with other equipment to form a complete production line.

6. The machine can change the packaging specifications according to the different use requirements of users. It is easy to adjust and debug. It is suitable for the production of large quantities of single varieties, and at the same time can meet the production of small batches and multiple varieties of users.

7. The equipment has product counting and operating speed display functions.

8. The box body is made of 201 stainless steel. It is suitable for CMP requirements, and the outer surface of the fuselage is made of stainless steel.