On Several Occasions When A Strong Crusher Is Used

　　The strong crusher is used on several occasions, for plastic raw materials, office workpieces, household plastic workpieces, single plastic waste, such as dismantled pipes, doors and windows, packaging materials, and other waste plastic products that are strictly classified according to the type of epoxy resin glue. . For different styles of waste plastics, the bulk density of the crushed materials is very different, and the bulk density of the crushed raw materials of the film, sheet, and wire drawing machine is small, which is also the whole process of waste plastic recycling and granulation.

　　Several types of applications for strong crushers.

　　The first type is the corner waste produced by the injection molding manufacturer in the whole process of manufacturing. The waste is cleaned up, with less environmental pollution and contains impurities. For example, plastic film of different sizes in the production of plastic film, edge, waste wire in the production of PP wire drawing machine, pipe, part of the introduction and special mining in the production of aluminum alloy profiles, unfilled parts introduced into the production Wait.

　　The second, strong crusher is used, for raw material office product workpiece, household plastic product workpiece, single plastic waste, such as dismantled pipes, doors and windows, packaging raw materials, and other waste plastics that are strictly classified according to the type of epoxy resin glue commodity.

　　The third type is mixed waste plastics that are difficult to differentiate or cannot be extracted, such as two-layer co-extrusion composite packaging bags, coated rubber, and plastic products, and mixed products of plastics and other materials. Different types of waste plastics have different characteristics.

　　As far as the impurity content is concerned, the impurity content of the waste scraps in the production and manufacture of the processing plant is less than 0.1%, and the residual content of the scraps and other products accumulated for a certain period is 0.1%~0.5%. The mixed type of mixed aluminum and cloth stone The residual composition of waste plastics usually exceeds 10%. For used plastic waste, it will include damage from ultraviolet radiation, thermal oxygen embrittlement, and pollutants, depending on the application specification.

　　For different styles of waste plastics, the bulk density of the crushed materials is very different, and the bulk density of the crushed raw materials of the film, sheet, and wire drawing machine is small, which is also considered in the whole process of waste plastic recycling and granulation feeding.